![]() ![]() In your router, assign either the IP it currently has or IP of your choice to that MAC address, locking in the Pi to that address. The Pi-Hole software needs a static IP for clients to find it. ![]() If you don’t, you can run Pi Finder (from Adafruit) and it will help you find it. It should boot up and you should see the Pi on your network. Put the SD card in the Pi, hook up the power to the right hand micro-USB (the left one is for data only), and plug it in. After first boot, both this file and the “ssh” file are deleted and the configuration is saved in other locations on the Pi SD card and will be in effect on subsequent boot-ups.Ĭontents of “wpa_nf” - substitute your network info where applicable.Įdit - added country code to the configuration file - see for additional details on the code you need for your location country=USĬtrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev ![]() This will enable the Pi to join your home network. You need a file named “wpa_nf” in the root directory of the SD card. Set up the new Pi to enable ssh and to connect to your wifi network when it starts up:Ĭopy a blank text file named “ssh” to the root directory of the SD card mounted on your computer. The card will typically show on the desktop labeled as "boot". Using Etcher software, burn this downloaded image to the freshly formatted SD card. Using a computer OS to format the card does not always make a usable card this tool is more reliable.ĭownload the latest version of Raspbian (your choice of desktop or lite) at : įormat new SD card using SD Card Formatter or similar software on your computer. Steps to set up Pi-Hole on Pi Zero W (with Raspbian) as of. (Note, this will work equally well on other Pi models - skip the wireless steps if you are using ethernet to connect the Pi to the network) Start to finish setting up a Pi Zero W as a wireless device and putting Pi-Hole on it.
0 Comments
Leave a Reply. |